ThermoFisher Scientific QuantStudio 12K Flex OpenArray AccuFill System, User Manual

Page: 42 / 103

2
6 7
3
1
4
5
Figure 22 Configure run pane (without sample plate information)
1
Load plate without sample information radio button
2
Sample plate name or serial number
3
Samples per subarray
4
Sample plate (color-coded to correspond to the OpenArray ™
Plate)
5
Tip box status
6
Sample plate (to confirm foil is removed)
7
OpenArray ™ Plate name and position
Before you begin—quick run workflow
• If samples are prepared in a 96-well plate, map the samples to a 384-well plate (see “Map a
384-well plate from 96-well plates” on page 30 ).
• Ensure that you have the files required for your workflow, for example, a sample file in CSV format
or a TPF or SPF file.
• Prepare samples (DNA and PCR reaction mix) in a 384-well plate, according to the user guide or
the application guide for your assay. Distribute the samples according to the layout determined in
the
Map Plates workflow.
• Place the sample plate in the sample plate holder on the instrument deck, with the notch to the left.
Do not stack sample plates.
Chapter 6
Set up and start the run with the quick run workflow
Before you begin—quick run workflow
6
42
QuantStudio ™ 12K Flex OpenArray ™ AccuFill ™ System User Guide