ThermoFisher Scientific QuantStudio 12K Flex OpenArray AccuFill System User Manual Download

Page: 11 / 103

IMPORTANT!

OpenArray

™

AccuFill

™

Software v1.2 and OpenArray

™

AccuFill

™

Software v2.0 cannot

be installed on the same computer at the same time.

File formats

The following file formats are used or generated by OpenArray

™

AccuFill

™

Software v2.0.

File

Description

Sample plate file (CSV)

Contains the sample layout information for the plate. It can be set up
for 96-well plates, 384-well plates, or OpenArray

™

Plates.

A sample plate file is used for the quick run workflow with sample
information and for the full run workflow.

• Serial number

(optional)

• Well, for example, A1, A2
• Sample ID
• Description

(optional)

• Dilution

(optional)

• Selected area index

(optional)

, defines the location in the sample

plate that is divided into eight sections

Note:

The file must contain column headers that match the items

listed above. The sample ID is populated in the OpenArray

™

AccuFill

™

Software. The other values are edited in Microsoft

™

Excel

™

software.

Transcript plate file (TPF)

Contains OpenArray

™

Plate information for gene expression runs. It is

required for the quick run workflow with sample information and the full
run workflow.

• Reagent information
• Number of samples per subarray
• Target information
• Thermal protocol

SNP plate file (SPF)

Contains OpenArray

™

Plate information for genotyping runs. It is

required for the quick run workflow with sample information and the
full run workflow.

• Reagent information
• Number of samples per subarray
• Target information
• Thermal protocol

Chapter 1

Product information

About the software

QuantStudio

™

12K Flex OpenArray

™

AccuFill

™

System User Guide

Summary of Contents for QuantStudio 12K Flex OpenArray AccuFill System








































































































Search results

Summary of Contents for QuantStudio 12K Flex OpenArray AccuFill System

Reviews:

Related manuals for QuantStudio 12K Flex OpenArray AccuFill System

Brands by name

Popular brands

ThermoFisher Scientific QuantStudio 12K Flex OpenArray AccuFill System, User Manual

Search results

Summary of Contents for QuantStudio 12K Flex OpenArray AccuFill System

Reviews:

Related manuals for QuantStudio 12K Flex OpenArray AccuFill System

Brands by name

Popular brands