![background image](http://html1.mh-extra.com/html/thermofisher-scientific/quantstudio-1/quantstudio-1_installation-use-and-maintenance-manual_1105599042.webp)
Run an experiment
Create and run an experiment from a template
1.
In the home screen, touch
Open Template
.
2.
(Optional)
Touch a category in the left column.
3.
Touch the file name.
4.
(
Optional
) Enter or edit template properties, including
Run File Name
(EDS file name),
Plate
Barcode
,
Reagent Information
, and
Data Destination
(see “Enter or edit template properties”).
5.
(
Optional
) Edit the run method (see “Edit the run method”
).
• Add, remove, or edit a step, stage, melt curve, or data collection point.
• Adjust the heated cover temperature, sample volume, or number of cycles.
• Configure ramp rate and pause settings.
6.
(
Optional
) Define plate wells with sample names and view
Well ID
,
Targets
, or
Dyes
assign, and view well details”).
7.
Load a plate into the instrument (see “Load and unload a plate in the QuantStudio
).
8.
Touch
Start Run
.
When prompted, confirm that you inserted a plate.
Note:
To disable this reminder, select
Do not show again
or select
Settings
4
Insert Plate
Reminder
in the home screen.
Run an experiment from a saved file
1.
In the home screen, touch
Load Experiment
.
2.
Touch the appropriate icon to navigate to your file location.
• For files saved to the guest profile, touch
My Instrument
4
Public
.
• For pre and post read files, touch
My Instrument
4
Post Read
.
3.
Touch the file name.
4.
(Optional)
Manage templates in either
USB
or
My Instrument
5.
(
Optional
) Enter or edit template properties, including
Run File Name
(EDS file name),
Plate
Barcode
,
Reagent Information
, and
Data Destination
(see “Enter or edit template properties”).
Chapter 4
Create and run experiments on the instrument
Run an experiment
4
42
QuantStudio
™
1 Plus Real-Time PCR System Installation, Use, and Maintenance Guide