![background image](http://html1.mh-extra.com/html/thermofisher-scientific/quantstudio-1/quantstudio-1_installation-use-and-maintenance-manual_1105599081.webp)
Before you begin
This section provides instructions for customer installation of the computer and the instrument. For
installation by a field service engineer (FSE), contact Support to order a service call.
Before starting the installation, complete the following tasks:
• Determine the configuration for your instrument and obtain the network information you need (see
• Review site requirements (see
QuantStudio
™
1 Plus Real-Time PCR System Site Preparation Guide
(Pub. No. MAN0024787).
• Review instrument and computer connections (see “Instrument and computer connections”
Instrument and computer connections
1
7
66
5
4
2
3
Figure 4 Instrument back panel
1
USB ports
2
WiFi USB port—Connect USB wireless adapter for
wireless network access (ordered separately)
3
Ethernet Port—RJ45 port for 100/1,000 Mbps Ethernet
communication with the instrument
4
RS232 Port—For service use only
5
Fuse Cover
6
Power Switch
7
Power Port—100 to 240 VAC
Appendix A
Install and connect the instrument to a network
Before you begin
A
QuantStudio
™
1 Plus Real-Time PCR System Installation, Use, and Maintenance Guide
81