6.
(
Optional
) Edit the run method (see “Edit the run method”
).
• Add, remove, or edit a step, stage, melt curve, or data collection point.
• Adjust the heated cover temperature, sample volume, or number of cycles.
• Configure ramp rate and pause settings.
7.
(
Optional
) Define plate wells with sample names and view
Well ID
,
Targets
, or
Dyes
assign, and view well details”).
8.
Load a plate into the instrument (see “Load and unload a plate in the QuantStudio
).
9.
Touch
Start Run
.
When prompted, confirm that you inserted a plate.
Note:
To disable this reminder, select
Do not show again
or select
Settings
4
Insert Plate
Reminder
in the home screen.
Repeat the last instrument run
This feature applies only to runs started from the instrument and is not available for runs started from
the desktop software. If you are signed-in, this feature applies to the last run from your instrument
profile.
1.
In the home screen, touch
Run Last
.
2.
(
Optional
) Enter or edit template properties, including
Run File Name
(EDS file name),
Plate
Barcode
,
Reagent Information
, and
Data Destination
(see “Enter or edit template properties”).
3.
(
Optional
) Edit the run method (see “Edit the run method”
).
• Add, remove, or edit a step, stage, melt curve, or data collection point.
• Adjust the heated cover temperature, sample volume, or number of cycles.
• Configure ramp rate and pause settings.
4.
(
Optional
) Define plate wells with sample names and view
Well ID
,
Targets
, or
Dyes
assign, and view well details”).
5.
Load a plate into the instrument (see “Load and unload a plate in the QuantStudio
).
6.
Touch
Start Run
.
When prompted, confirm that you inserted a plate.
Note:
To disable this reminder, select
Do not show again
or select
Settings
4
Insert Plate
Reminder
in the home screen.
Chapter 4
Create and run experiments on the instrument
Run an experiment
4
QuantStudio
™
1 Plus Real-Time PCR System Installation, Use, and Maintenance Guide
43
