Safety information for instruments not manufactured by
Thermo Fisher Scientific
Some of the accessories provided as part of the instrument system are not designed or built by Thermo
Fisher Scientific. Consult the manufacturer's documentation for the information needed for the safe use
of these products.
Instrument safety
General
CAUTION!
Do not remove instrument protective covers.
If you remove the protective instrument
panels or disable interlock devices, you may be exposed to serious hazards including, but not limited
to, severe electrical shock, laser exposure, crushing, or chemical exposure.
Physical injury
CAUTION!
Moving Parts.
Moving parts can crush, pinch and cut. Keep hands clear of moving parts
while operating the instrument. Disconnect power before servicing.
WARNING!
Do not attempt to lift or move the instrument without the assistance of others. Use
appropriate moving equipment and proper lifting technique, improper lifting may result in serious
injury.
Electrical safety
WARNING!
Ensure appropriate electrical supply.
For safe operation of the instrument:
·
Plug the system into a properly grounded receptacle with adequate current capacity.
·
Ensure the electrical supply is of suitable voltage.
·
Never operate the instrument with the ground disconnected. Grounding continuity is required for
safe operation of the instrument.
WARNING!
Power Supply Line Cords.
Use properly configured and approved line cords for the
power supply in your facility.
WARNING!
Disconnecting Power.
To fully disconnect power either detach or unplug the power
cord, positioning the instrument such that the power cord is accessible.
Appendix E
Safety
Safety information for instruments not manufactured by Thermo Fisher Scientific
E
QuantStudio
™
1 Plus Real-Time PCR System Installation, Use, and Maintenance Guide
101
