manualshive.com logo in svg

Thermo Finnigan LTQ, Hardware Manual

Share
Download
Thermo Finnigan LTQ Hardware Manual Download Page 152

MS Detector Maintenance

Cleaning the Fan Filter

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@'JOOJHBO-52

5IFSNP

&-&$530/$03103"5*0/

4-44

______________________ Finnigan LTQ Hardware Manual _______________________

4.9

Cleaning the Fan Filter

You need to clean the fan filter (P/N 97055-20254) very four months. The fan 
filters is located on the rear of the MS detector on the right side. To clean the 
fan filters, proceed as follows:

1. Remove the fan filter from the rear of the MS detector by pulling it up and 

out of the fan filter bracket.

2. Wash the fan filters in a solution of soap and water.

3. Rinse the fan filters with tap water.

4. Squeeze the water from the fan filters and allow them to air dry.

5. Reinstall the fan filter in the fan filter bracket.

Summary of Contents for Finnigan LTQ















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands