Thermo Scientific Thermo Scientific Vanquish VC-D40, Operating Manual

Page: 61 / 174

5 • Installation
Variable Wavelength Detectors (VC-D40, VF-D40)
Operating Manual Page 61
4
2
1
3
Figure 11: Installing a flow cell with connection unit
No. Description
1 Connection unit
2 Locating pin
3 Connection unit socket
4 Connection unit screw (knurl)
3. Tighten the connection unit screw hand-tight.
4. Push the flow cell completely into the flow cell opening.
5. Tighten the two flow cell screws hand-tight.
6. Set up the flow connections on the flow cell, see Setting Up the Flow
Connections (
}
page 62) .
7. Perform wavelength validation, see Performing a Wavelength
Validation and Calibration ( } page 119) .
TIP If the wavelength validation fails, perform a calibration of
wavelengths.