Thermo Scientific Ramsey MINI CK100, Operating And Service Manual

Page: 78 / 97

3-48
Default: Cr Selections : Cr, Lf, Cr+Lf
Some printers cannot accept characters while they are printing. In some cases, the handshake
is not well controlled by the printer, so a delay at end of line is helpful.
Default: 0 sec Min: 0 sec Max: 5 sec
A form feed character can be sent to the printer after each report to force the printer to eject the
paper. If NO is selected, a normal END OF LINE character(s) is printed at the end of the
report.
Default: No Selections: No, Yes
3.17.2.2 Periodical Printing
If you want to generate periodical printing, enter the number of minutes, hours, or days in the
following screen. Entering 0 prevents periodical printing. Use the INTV key to switch from
minutes to hours and to days.
Default: 0 min Min: 0 min, 0 ore, 0 days Max: 59 min, 23 hours, 365 days
The system can print at specific times during the day. Enter the time you want to obtain the
printing. Use the NEXT key to scroll between the print times (maximum 4). The ON/OFF key
enables or disables the displayed print time.
-PRINTER SCROLL 2 -
End of line
> CR <
CHOICE ENTER Password:Service
-PRINTER SCROLL 3 -
Delay end of line
0 sec
ENTER
Password:Service
PRINTER SCROLL 4 -
Form Feed
> NO <
CHOICE ENTER
Password:Service
-PRINTER SCROLL 5 -
Print Interval
0 min
ENTER
INTV
Password:Operator