Thermo Scientific Ramsey MINI CK100, Operating And Service Manual

Page: 34 / 97

3-4
3.4 Menu Displays
The interface is a menu driver machine that allows the operator to access all setup, test and
calibration parameters.
The following table shows the menu structure.
The functions highlighted are optional and are availables only if the corresponding option hardware
or software has been installed.
Mode Menu F1 F2 F3
SETUP
MAIN MENU 1 ZERO CAL SPAN CAL LINEAR
MAIN MENU 2 DISPLAY SCALE DATA CALIB DATA
MAIN MENU 3 PROTECTION DIAG TEST
MAIN MENU 4 I/O DEF DEF. ALLARM NET
MAIN MENU 5 COMM A PRINT PROFIBUS
RUN
SCREEN 1 S/R TARE ALARM
SCREEN 2 RESET ACQ ALARM
The following keys allows the scroll through the menus :
•
Press
RUN/SETUP
key to change Mode
•
Press
DOWN SCROLL
key to advance through the menus.
•
Press
UP SCROLL
key to return to the previous item displayed.
•
Press
F1 / F2 / F3
key to access sub-menus or to activate the function displayed.
If the MINI CK100 is password protected, the appropriate password must be entered prior to
making changes or performing routine calibration. Menus may be viewed without entering a
password, but no entries are allowed unless the password is entered.
3.5 First Power On
When power is first applied to the MINI CK100, the system steps the operator through menus
and options that bring the system to a weighing state. After the initial programming the
instrument executes a simulate scale calibration than the system is ready for the weighing.
For to obtain a better accuracy is necessary a calibration with test weights
The data request are available on menu Display, Scale Data, Calibration Data.
Section 3.9, 3.10 and 3,11 of this manual.