Declaration
Manufacturer:
Thermo Fisher Scientific
Thermo Fisher Scientific is the manufacturer of the instrument described in this manual and, as such, is responsible
for the instrument safety, reliability and performance only if:
•
installation
•
re-calibration
•
changes and repairs
have been carried out by authorized personnel and if:
•
the local installation complies with local law regulations
•
the instrument is used according to the instructions provided and if its operation is only entrusted to qualified
trained personnel
Thermo Fisher Scientific is not liable for any damages derived from the non-compliance with the aforementioned
recommendations.
Thermo Fisher Scientific (Bremen) GmbH
Hanna-Kunath-Str. 11; 28199 Bremen, Germany; Tel. +49 421 54930
Regulatory Compliance
Thermo Fisher Scientific performs complete testing and evaluation of its products to ensure full compliance with
applicable domestic and international regulations.
When the system is delivered to you, it meets all pertinent electromagnetic compatibility (EMC) and safety
standards.
Safety
This device complies with the following safety standards according to Low Voltage Directive 2014/35/EU.
•
EN 61010-1:2010 (3
a
ed.); IEC 61010-1:2010 (3
rd
ed.); CAN/CSA C22.2 No. 61010-1-12;
UL 61010-1:2012; IEC 61010-2-010:2014 (3
rd
ed.); IEC 61010-2-081:2015 (2
nd
ed.)
Electromagnetic Compatibility
This device complies with the following regulations on Electromagnetic Compatibility (EMC) and Radio
Frequency Interference (RFI) according to directive 2014/30/EU:
•
IEC 61326-1:2013 (2a ed.); IEC 51326-1:2012 (2
nd
ed.)
IMPORTANT:
Class A equipment is intended for use in an industrial environment. In others
environments there may be potential difficulties in ensuring electromagnetic compatibility, due
to the conducted as well as radiated disturbances.
