1
Getting Familiar with your EA IsoLink IRMS System for CNSOH
Technical Features
2
EA IsoLink IRMS System for CNSOH Operating Manual
Thermo Scientific
Technical Features
summarizes the major technical features of the EA IsoLink IRMS System for CNSOH.
Instrument Configurations
The Flash IRMS Elemental Analyzer is able to be coupled to an Isotope Ratio Mass Spectrometer
(IRMS) for the following determinations. See
Software Requirements
Thermo Scientific Isotope Ratio Mass Spectrometer series require the use of the Isodat Software Suite.
In most cases the installation of Isodat Software Suite is sufficient to operate the EA IsoLink IRMS
System for CNSOH. See
.
describes the minimum hardware required to run the software.
Table 1.
Technical Features of the Flash IRMS Elemental Analyzer
Features
Description
Detector
Thermal conductivity detector (TCD)
External interface
RS 232 serial line
Instrument control
Isodat Software Suite 3.0, Eager
Smart
Data Handling Software
Power supply
230 Vac ±10%, 50/60 Hz ±2 Hz, 1400 VA
Dimensions (cm)
Height 50 (54 with fittings); Width 59, Depth 58
Mass (kg)
65
Sound Pressure Level
Less than 70 db (A)
Table 2.
EA IsoLink IRMS System for CNSOH Analytical Capabilities
Configuration
Description
H
Quantitative (weight%) and stable isotope analysis of hydrogen on H
2
.
O
Quantitative (weight%) and stable isotope analysis of oxygen on CO.
N
Quantitative (weight%) and stable isotope analysis of nitrogen on N
2
.
C
Quantitative (weight%) and stable isotope analysis of carbon on CO
2
.
S
Quantitative (weight%) and stable isotope analysis of sulfur on SO
2
.
IMPORTANT
Oxygen and hydrogen analyses are performed using the
left
furnace (high
temperature conversion). Nitrogen, carbon and sulfur analyses are performed using the
right
furnace for combustion.
ATTENTION
If you want to operate with the EA IsoLink CNSOH as a stand-alone instrument, you
need to install Eager
Smart
