manualshive.com logo in svg

Thermo Scientific Applied Biosystems QuantStudio 6 Pro, User Manual

The Thermo Scientific Applied Biosystems QuantStudio 6 Pro is a cutting-edge scientific instrument. It is essential to have the User Manual to fully utilize its features. Download the comprehensive and free User Manual from our website to maximize the potential of this exceptional product.

Share
Download
background image

Install the desktop software

If you ordered a computer supplied by Thermo Fisher Scientific, the Field Service Engineer will
configure the computer and install the desktop software during system installation.

1.

Use an administrator account to log in to the computer on which you are installing the desktop
software.

2.

Unzip the downloaded software.
The example files are embedded in the software.

3.

Double-click 

setup.exe

.

4.

Follow the 

InstallShield Wizard

 prompts to install the software.

5.

Accept the License Agreement.

6.

Select 

Typical

 as the setup preference, then click 

Next

.

7.

Click 

Finish

.

Networking

IMPORTANT! 

This section provides general networking information. It 

does not

 provide adequate

detail to integrate the instrument into all possible network architectures. Because a network may
contain advanced features (such as a firewall or network domains), we recommend that you consult
a network administrator before connecting the instrument to your laboratory network.

Supported options for instrument and computer connections

We support the following direct, networked (LAN– local area network), or Connect cloud-based platform
configurations. Configurations other than those listed are not recommended. Select a configuration that
meets the needs of your laboratory's instrument, software, and workflow requirements.

Note: 

For detailed information about networking your instrument, see the 

QuantStudio

™

 6 Pro and 7

Pro Real-Time PCR Systems IT Checklist

 (Pub. No. MAN0018160).

Connect cloud-based platform connection

• Internet access and a computer with the Chrome

™

 web browser to access the Connect platform.

• Computer

‑

to

‑

Connect platform connection 

(select an option)

:

– Wired connection to the internet using an Ethernet cable – 

or

–

– Wireless connection to the internet

Appendix B 

Connect the instrument to a network

Networking

B

198

QuantStudio

™

 6 Pro Real-Time PCR System and QuantStudio

™

 7 Pro Real-Time PCR System User Guide

Summary of Contents for Applied Biosystems QuantStudio 6 Pro


















































































































































































































































Reviews:

No comments

Related manuals for Applied Biosystems QuantStudio 6 Pro

KaVo 4040 Operating, Maintenance And Assembly Instructions preview
4040
Brand: KaVo Pages: 16
NORLUX Ledpro Helios Installation Manual preview
Ledpro Helios
Brand: NORLUX Pages: 2
Panasonic SF2B Series Instruction Manual preview
SF2B Series
Brand: Panasonic Pages: 30
CAMPAGNOLA HERCULES Quick Manual preview
HERCULES
Brand: CAMPAGNOLA Pages: 4
Keithley 7071 Instruction Manual preview
7071
Brand: Keithley Pages: 79
Kayakpro SUP ERGO Assembly Instruction Manual preview
SUP ERGO
Brand: Kayakpro Pages: 17
Yoshitake DS-1 Operation Manual preview
DS-1
Brand: Yoshitake Pages: 11
laerdal SimMan 3G Trauma Quick Setup Manual preview
SimMan 3G Trauma
Brand: laerdal Pages: 16
laerdal SimMan 3G Maintenance Manual preview
SimMan 3G
Brand: laerdal Pages: 16
laerdal SimMan Important Product Information preview
SimMan
Brand: laerdal Pages: 60
laerdal Nursing Baby Manual preview
Nursing Baby
Brand: laerdal Pages: 4
laerdal Resusci Anne Simulator Important Product Information preview
Resusci Anne Simulator
Brand: laerdal Pages: 8
laerdal Nursing Baby VitalSim Manual preview
Nursing Baby VitalSim
Brand: laerdal Pages: 15
Madrigal Stiletto Quick Start Manual preview
Stiletto
Brand: Madrigal Pages: 5
MacDon M1170NT5 Operator'S Manual preview
M1170NT5
Brand: MacDon Pages: 504
Mangar International Leglifter User Instructions And Warranty preview
Leglifter
Brand: Mangar International Pages: 8
Malvern Instruments Zetasizer uV Manual preview
Zetasizer uV
Brand: Malvern Instruments Pages: 30
Omlet Eglu Cube Instructions preview
Eglu Cube
Brand: Omlet Pages: 2

Brands by name

Popular brands

Load more brands