C-Link Protocol Commands
Hardware Configuration
Thermo Fisher Scientific
Model 43
i
Trace Level-Enhanced Instruction Manual
B-31
pres comp
This command reports whether pressure compensation is on or off. The
example that follows shows that pressure compensation is on.
Send:
pres
comp
Receive: pres
comp
on
set pres comp
onoff
These commands turn the pressure compensation
on
or
off
. The example
that follows turns pressure compensation off.
Send:
set
pres
comp
off
Receive:
set pres comp off ok
temp comp
This command reports whether temperature compensation is on or off.
The example that follows shows the temperature compensation is off.
Send:
temp
comp
Receive: temp
comp
off
set temp comp
onoff
These commands turn the temperature compensation
on
or
off
. The
example that follows turns temperature compensation off.
Send:
set
temp
comp
off
Receive:
set temp comp off ok
contrast
This command reports the screen’s level of contrast. The example that
follows shows the screen contrast is 50%, according to
Table B–8
.
Send:
contrast
Receive: contrast
5:50%
set contrast
level
This command sets the screen’s
level
of contrast, according to
Table B–8
.
The example that follows sets the contrast level to 50%.
Send:
set
contrast
5
Receive:
set contrast 5 ok
Hardware
Configuration
