RES-32XR3-S for X8DTL-6/6F Installation Manual
2-16
Themis Computer
3.
Squeeze the locking lever toward the pull handle and firmly pull the power
supply from the chassis.
2.1.7.2 Installing a Power Supply
Perform the following steps to install a power supply:
1.
Insert the replacement power supply into an empty slot with the extraction
handle facing to the right (see
2.
Push the power supply carefully into its slot until it is firmly seated (a click
will be heard when the locking lever is securely fastened to the chassis).
3.
Replace the power supply locking bracket and tighten the two captive Phillips
screws (see
) to secure both power supplies.
Caution:
When pulling the power supply from the chassis, hold it at the bot-
tom to prevent it from falling and damaging the unit.
