1-20
Themis Computer
RES-32XR3-S for X8DTL-6/6F Installation Manual
the baffle.
Rear Access
—Accessing the I/O connectors and PCI card I/O on the rear of the
RES-32XR3-S for X8DTL-6/6F requires opening the rear sound baffle door. To do
this, loosen the four (4) captive knurled Phillips screws
A
holding the baffle door to
the chassis (see
A
in
Figure 1-8
) and swing the door downward away from the chas-
sis, exposing the rear connectors and PCI cards.
Removing the protective top cover for access to the interior requires that the rear
sound baffle be totally removed (this can be done with the baffle door closed). To do
this, five (5) M3x4 flathead Phillips screws
B
must be removed, two on each side of
the baffle and one (captive) in the middle on the top (see
Figure 1-8
).
After removing the rear baffle, the top cover can be removed as described in Section
2.1.1, “Remove Protective Top Cover,” on page 2-1 (Chapter 2, "Installation and
Operation").
Figure 1-8.
RES-32XR3-S for X8DTL-6/6F with Rear Sound Baffle Installed (Rear
View)
Rear Sound Baffle
A
A
A
A
B
B
Right Side
B
B
B
Left Side
Rear
Rear
