manualshive.com logo in svg

Themis RES-32XR3-S, Installation Manual

Share
Download
Themis RES-32XR3-S Installation Manual Download Page 72

3-4

Themis Computer

RES-32XR3-S  for X8DTL-6/6F Installation Manual

3.2.2

Supermicro X8DTL-6 Motherboard

• Version: This item displays the BIOS revision used in your system.

• Build Date: This item displays the date when this BIOS was completed.

3.2.3

Processor

The AMI BIOS will automatically display the status of the processor used in your
system:

• CPU Type: This item displays the type of CPU used in the motherboard.

• Speed: This item displays the speed of the CPU detected by the BIOS.

• Physical Count: This item displays the number of processors installed in your

system as detected by the BIOS.

• Logical Count: This item displays the number of CPU Cores installed in your

system as detected by the BIOS.

3.2.4

System Memory

This displays the size of memory available in the system:

• Populated Size: This item displays the installed memory size detected by the

BIOS.

• Available Size: This item displays the available memory detected by the BIOS.

Summary of Contents for RES-32XR3-S



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands