manualshive.com logo in svg

Themis RES-32XR3-S, Installation Manual

Share
Download
Themis RES-32XR3-S Installation Manual Download Page 85

3-17

Themis Computer

BIOS Setup Utility

Advanced Setup Configurations

transfer rate of 13.3 MBs.

Select MWDMA2 to allow the BIOS to use Multi-Word DMA mode 2. It has a data
transfer rate of 16.6 MBs.

Select UDMA0 to allow the BIOS to use Ultra DMA mode 0. It has a data transfer
rate of 16.6 MBs. It has the same transfer rate as PIO mode 4 and Multi Word DMA
mode 2.

Select UDMA1 to allow the BIOS to use Ultra DMA mode 1. It has a data transfer
rate of 25 MBs.

Select UDMA2 to allow the BIOS to use Ultra DMA mode 2. It has a data transfer
rate of 33.3 MBs.

Select UDMA3 to allow the BIOS to use Ultra DMA mode 3. It has a data transfer
rate of 66.6 MBs.

Select UDMA4 to allow the BIOS to use Ultra DMA mode 4. It has a data transfer
rate of 100 MBs.

Select UDMA5 to allow the BIOS to use Ultra DMA mode 5. It has a data transfer
rate of 133 MBs.

Select UDMA6 to allow the BIOS to use Ultra DMA mode 6. It has a data transfer
rate of 133 MBs. The options are 

Auto

, SWDMAn, MWDMAn, and UDMAn.

S.M.A.R.T. For Storage drives

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict
impending drive failures. Select Auto to allow the AMI BIOS to automatically
detect storage drive support. Select Disabled to prevent the AMI BIOS from using
the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T. to sup-
port storage drive condition. The options are Disabled, Enabled, and 

Auto

.

32-Bit Data Transfer

Select Enable to enable the function of 32-bit IDE data transfer. The options are

Enabled 

and Disabled.

3.3.5

PCI/PnP Configuration

3.3.5.1 Clear NVRAM

Summary of Contents for RES-32XR3-S



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands