manualshive.com logo in svg

Themis RES-32XR3-S, Installation Manual

Share
Download
Themis RES-32XR3-S Installation Manual Download Page 82

3-14

Themis Computer

RES-32XR3-S  for X8DTL-6/6F Installation Manual

3.3.3.14 Active State Power Management

Select Enabled to start Active-State Power Management for signal transactions
between L0 and L1 Links on the PCI Express Bus. This maximizes power-saving
and transaction speed. The options are Enabled and 

Disabled

.

3.3.3.15 USB Functions

This feature allows the user to decide the number of onboard USB ports to be
enabled. The Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, 8 USB
ports, 10 USB ports

 

and 

12 USB ports

.

3.3.3.16 USB 2.0 Controller

Select Enabled to activate the onboard USB 2.0 controller. The options are 

Enabled

and Disabled. (The options are not selectable unless the item above- USB Functions
is set to Disabled.)

3.3.3.17 Legacy USB Support

Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB
support will be automatically enabled if a legacy USB device is installed on the
motherboard, and vise versa. The settings are Disabled, Enabled and 

Auto

.

3.3.4

IDE/SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence of
the IDE devices and displays the following items:

3.3.4.1 SATA#1 Configuration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while select-
ing Enhanced sets SATA#1 to native SATA mode. The options are Disabled, Com-
patible and 

Enhanced

.

Configure SATA#1 

This feature allows the user to select the drive type for SATA#1. The options are

IDE

, RAID and AHCI. (When the option-RAID is selected, the item “ICH RAID

Code Base” will appear.)

Summary of Contents for RES-32XR3-S



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands