2-15
Themis Computer
Installation and Operation
Installation Procedures
1.
Remove the two captive Phillips screws holding the power supply locking
bracket to the chassis. Store the bracket for later use (see
A
in
2.
Put the right index finger on the power supply extraction handle and the right
thumb on the left side of the power supply locking lever.
Figure 2-12.
The RES-32XR3-S for X8DTL-6/6F Power Supply Locking Mecha-
nism
Extraction
Push right to release power supply
Handle
Power Supply
Locking Lever
Power LED
AC Outlet
Phillips Screw Hole
(for power supply locking bracket)
Phillips Screw Hole
for knurled captive screw
on power supply
locking bracket
Remove power supply locking bracket
A
... then disengage locking lever and remove power supply
B
Power supply locking bracket
Knurled captive Phillips screw
Knurled captive Phillips screw
