Themis RES-32XR3/FIO, Installation Manual

Page: 82 / 142

3-18
Themis Computer
RES-32XR3/FIO Installation Manual
3.3.6.6 PCI-E Slot 1 x8, PCI-E Slot 2 x16, PCI-E Slot 3 x8, PCI-E Slot
4 x8 (in x16 slot), PCI-E Slot 5 PCI-E x4 (in x8 slot), PCI-E Slot
6 x16, PCI-E Slot 7 x8.
This feature allows you to Enable or Disable any of the PCI slots. The options are
Enable and Disable.
3.3.6.7 Onboard LAN Option ROM Select
Select the onboard LAN option ROM type. The options are iSCSI and PXE .
3.3.6.8 Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option
ROM
Select Enabled to enable the onboard LAN1 or LAN2 Option ROM. This is to boot
computer using a network interface. The options are Enabled and
Disabled .
3.3.6.9 Boot Graphics Adapter Priority
This feature allows the user to select the priority graphics adapter for system boot.
The options are Auto and
Onboard VGA.
3.3.7 Super IO Device Configuration
3.3.7.1 Serial Port1 Address/Serial Port2 Address
This option specifies the base I/O port address and the Interrupt Request address of
Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from access-
ing any system resources. When this option is set to Disabled, the serial port physi-
cally becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8 as its
I/O port address and IRQ 4 for the interrupt address. The options for Serial Port 1 are
Disabled,
3F8/IRQ4 , 3E8/IRQ4, 2E8/IRQ3. The options for Serial Port 2 are Dis-
abled, 2F8/IRQ3, 3E8/IRQ4, and 2E8 IRQ3.
Serial Port 2 Mode
This feature allows the user to set the mode for Serial Port B. The options are Nor-
mal , IR (Infra-Red) and ASK-IR.