Themis RES-32XR3/FIO, Installation Manual

Page: 54 / 142

RES-32XR3/FIO Installation Manual
2-8
Themis Computer
2. Loosen the captive knurled screw on the chosen PCI slot covers and remove
the slot covers. (see
Figure 2-6 ).
3. Install the new card, making sure the I/O panel is aligned with the chassis
opening.
4. Repeat Step 1 and Step 3 until all additional cards have been installed.
5. Attach any internal I/O cables to the installed PCI cards, and carefully fold
and tuck any exposed ribbon cables into the cabinet.
6. If you have no further installations to perform, close the RES-32XR3/FIO
chassis by refastening the top cover removed in Section 2.1.1, “Remove Pro-
tective Top Cover,” on page 2-1.
2.1.4 Lithium Battery
2.1.4.1 Removing the Lithium Battery
Perform the following steps to remove the lithium battery:
1. Make sure the system is powered off (see “Operation” on page 2-15).
2. Locate the lithium battery socket and squeeze the latch (see A , Figure 2-7 )
together until the battery lifts out of its socket.
3. Remove the old battery and replace with a new battery (see next section).
Figure 2-7.
The RES-32XR3/FIO Lithium Battery and Socket
To release, squeeze battery latch together...
Battery
A B
Latch
... and remove battery from socket