Themis RES-32XR3/FIO, Installation Manual, Page: 123 / 142

C-11
Themis Computer
C—Red Hat Enterprise Linux 5 Installation
Installation
C.2.13 Step 13
Step 13:
From the Edit Interface pop-up screen, you can choose to configure the IP
address and Netmask (for IPv4 - Prefix for IPv6) of the device via DHCP (or manu-
ally if DHCP is not selected) and you can choose to activate the device at boot time.
If you select
Activate on boot , your network interface is started when you boot (see
Figure C-13 on page C-11 ). If you do not have DHCP client access or you are
unsure what to provide here, please contact your network administrator. Click OK.
Figure C-13. Edit Interface Pop-Up Screen