Themis RES-32XR3/FIO, Installation Manual

Page: 61 / 142

2-15
Themis Computer
Installation and Operation
Operation
2.2.2 Rack-Mount Slides (Optional)
Rack-Mount Slides can be mounted on each side of the RES-32XR3/FIO for the pur-
pose of sliding the unit in and out of a rack. Mounting slides are optional and should
be ordered at the time your system is purchased.
To learn how to install rack-mount slides, refer to Appendix B, “Rack-Mount Slide
Installation”.
2.3 Operation
2.3.1 Plugging in the AC Power Cords
Before powering on the RES-32XR3/FIO, plug in the AC power cords as follows:
• Plug an AC power cord (shipped with unit) into the AC power socket on each
power supply on the front of the RES-32XR3/FIO, (see Figure 2-13 ).
Caution: Any screws used to mount a slide to a RES-32XR3/FIO chassis must not
exceed a length of 3/8” to prevent excessive penetration of the chassis.
Figure 2-13.
AC Power Socket and LED on the RES-32XR3/FIO
AC Power Socket
Power LED
Locking Lever