Themis RES-32XR3/FIO, Installation Manual

Page: 104 / 142

3-40
Themis Computer
RES-32XR3/FIO Installation Manual
3.8 BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time the
system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors will not allow the system to continue the boot-up procedure. If a fatal
error occurs, you should consult with your system manufacturer for possible repairs.
These fatal errors are usually communicated through a series of audible beeps. The
numbers on the fatal error list correspond to the number of beeps for the correspond-
ing error.
BIOS Error Beep Codes
Beep Code
Error Message
Description
1 beep Refresh
Circuits have been reset.
(Ready to power up)
5 short beeps + 1
long beep
Memory error No memory detected in the
system
8 beeps
Display memory read/write
error
Video adapter missing or with
faulty memory
1 continuous beep
w/Front Panel OH
LED on
System Overheat 1 continuous beep with the
front panel OH LED on
Table 1: BIOS Error Beep Codes