Themis RES-32XR3/FIO, Installation Manual

Page: 62 / 142

RES-32XR3/FIO Installation Manual
2-16
Themis Computer
2.3.2 Getting Started
2.3.2.1 Configuration
1. Make sure all storage drives are installed (see “SATA Storage Drive”, page 2-
9). Drive ID numbers are shown in
Figure 2-8 on page 2-9. Changes may be
made through the BIOS.
2. Connect a multiscan monitor to the VGA connector.
3. Attach a PS/2 keyboard and mouse to the appropriate connectors on the front
I/O panel of the RES-32XR3/FIO (see
Figure 1-5 on page 1-7)
2.3.2.2 Turning The System On
1. Plug the AC power cord from each of the RES-32XR3/FIO power supplies
into a “live” AC outlet.The LED on each power supply will turn on when AC
power is enabled.
2. On the front of the RES-32XR3/FIO push the system power on/off button (see
Figure 2-14 ). This will cause the system
POWER
LED to light (green).
2.3.2.3 Linux Installation
The subject of installing the Linux operating system onto the RES-32XR3/FIO is
detailed in Appendix C, “Red Hat Enterprise Linux 5 Installation”.
Figure 2-14.
System Power Button and LED on the RES-32XR3/FIO Front
System Power
On/Off Button
Power LED