Themis RES-32XR3/FIO, Installation Manual

Page: 55 / 142

2-9
Themis Computer
Installation and Operation
Installation Procedures
2.1.4.2 Installing a Lithium Battery
Perform the following steps to insert a new lithium battery:
1. Tilt the replacement battery into the empty socket so that it is angled under the
battery latch (see
B , Figure 2-7 ).
2. Carefully press down on the battery until it clicks firmly into place.
2.1.5 SATA Storage Drive
The accessory kit shipped with your RES-32XR3/FIO contains two barrel lock keys.
This provides you the option of unlocking/locking the storage drives (see
Figure
2-8 ).
2.1.5.1 Storage Drive Removal
Perform the following steps to remove and install a storage drive: (see Figure 2-8 ).
1. Make sure the system is powered off (see “Operation” on page 2-15).
2. Locate the drive to be removed.
3. Insert the barrel lock key into the storage drive you want to remove, and turn
it 45 degrees clockwise (presuming the storage drive is locked; see
A in
Figure 2-9 on page 2-10).
Figure 2-8.
Unlocking the RES-32XR3/FIO Storage Drives (Front Doors Removed)
Drive Lock
(one per drive)
Latch Lock
Button
Drive 0 Drive 1
Drive 2