Themis RES-32XR3/FIO, Installation Manual

Page: 60 / 142

2-14
Themis Computer
RES-32XR3/FIO Installation Manual
Perform the following steps to install a power supply:
1. Insert the replacement power supply into an empty slot with the extraction
handle horizontal, (see
Figure 2-11 on page 2-13).
2. Push the power supply carefully into its slot until it is firmly seated (a click
will be heard when the locking lever is securely fastened to the chassis).
3. Replace the power supply locking bracket and tighten the two captive Phillips
screws (see
Figure 2-11 ) to secure both power supplies
2.2 Rack Mounts
2.2.1 Mounting Brackets
The rack-mount brackets (flanges) are used to secure the chassis to the 19” rack (see
Figure 2-12 ). Handles are used to pull the RES-32XR3/FIO from the rack when
rack-mount slides have been installed on the sides of the chassis (see following sec-
tion).
Figure 2-12.
Right Rack-Mount Bracket
Right Mounting
Bracket