Themis RES-32XR3/FIO, Installation Manual

Page: 56 / 142

RES-32XR3/FIO Installation Manual
2-10
Themis Computer
4. Firmly push in the latch lock until the latch handle releases away from the
drive (see
B in Figure 2-9 ).
5. Grab the latch handle and pull the drive completely away from its slot (see C
in Figure 2-9 ).
2.1.5.2 Storage Drive Installation
To install a storage drive,
1. Make sure the latch handle of the drive to be installed is in the open position.
2. Properly orient the new drive and insert it into the vacant drive slot. If the
drive cannot be inserted into the slot, rotate it 180 degrees.
3. Push the drive toward the rear (DO NOT CLOSE the latch handle while push-
ing) until the drive is flush with the front of the chassis. The handle will swing
closed when it comes into contact with the RES-32XR3/FIO chassis.
Caution: When pulling the storage drive from the chassis, hold it at the bot-
tom to prevent it from falling and damaging the drive.
Figure 2-9. RES-32XR3/FIO Storage Drive Removal
Insert key into barrel lock and turn
A
... push the latch lock,...
B
Latch
Lock
Latch Handle
... and pull drive out with the latch handle
C
45 degrees clockwise,...