Themis RES-12DCX Installation Manual Download Page 119

Page: 119 / 144

D-5

Themis Computer

Red Hat Enterprise Linux Installation

Installation

D.2.2.4 Automatic Partitioning

Automatic partitioning (see

Figure D-4

) allows you to have some control concerning

what data is removed (if any) from your system.

Your options are:

Remove all Linux partitions on this system.

Select this option to remove only

Linux partitions (partitions created from a previous Linux installation). This does
not remove other partitions you may have on your hard drive(s) (such as VFAT or
FAT32 partitions).

Remove all partitions on this system.

Select this option to remove all partitions on

your hard drive(s) (this includes partitions created by other operating systems such
as Windows VFAT or NTFS partitions).

Figure D-4.

Automatic Partitioning

Note:

If you select this option, all data on the selected hard drive(s) is removed

by the installation program.

Summary of Contents for RES-12DCX

















































































































































Search results

Summary of Contents for RES-12DCX

Reviews:

Related manuals for RES-12DCX

Brands by name

Popular brands

Themis RES-12DCX, Installation Manual

Search results

Summary of Contents for RES-12DCX

Reviews:

Related manuals for RES-12DCX

Brands by name

Popular brands