Themis RES-12DCX, Installation Manual

Page: 111 / 144

C-35
Themis Computer
BIOS Setup Utility
BIOS POST Messages
Incorrect Drive A type - run SETUP
The type of floppy drive A: is not correctly identified in Setup.
Incorrect Drive B type - run SETUP
The type of floppy drive B: is not correctly identified in Setup.
System cache error - Cache disabled
The RAM cache failed and BIOS disabled the cache. On older boards, check the
cache jumpers. You may have to replace the cache (call your dealer.) A disabled
cache slows system performance considerably.
CPU ID:
This is the CPU socket number for a Multi-Processor error.
EISA CMOS not writeable
ServerBIOS2 test error: Cannot write to EISA CMOS.
DMA Test Failed
ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access)
registers.
Software NMI Failed
ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).
Fail-Safe Timer NMI Failed
ServerBIOS2 test error: Fail-Safe Timer takes too long.
device Address Conflict
There is an address conflict for the specified device .
Allocation Error for: device
Run the ISA or EISA Configuration Utility to resolve a resource conflict for the
specified device.
CD ROM Drive
Identify the CD ROM Drive.