Textron Cessna 172S Skyhawk SP, Information Manual

Page: 377 / 491

SECTION 9' SUPPLEMENTS
SUPPLEMENT 15 - FAA APPROVED
CESSNA
MODEL 172S
5 4
3
2
BENDIX
KING
KAP 140
P R
C6EJ '
RLT
~
'REV" IALTI ~
KAp 140 WITH ALTITUDE PRESELECT
NOTE
'Numbered items apply to the KAP 140 with Altitude
Preselect. Other 'controls and indicators shown are
the same as those on the KAP 140 without Altitude
Preselect (refer to Figure 2),
1, ROTARY KNOBS -- Used to set the altitude alerter reference
altitude; or may be used immediately after pressing the BARO
button, to adjust the autopilot bare setting to match that of the
airplane's altimeter when manual adjustmentis
required, (In
some systems, the baro setting may be automatically synched
to that of the altimeteL) .
2. BARO SET (BAR 0) BUDON -- When pushed and released,
will change the display from the altitude ale'rter selected
altitude to the baro selling display (either IN HG or HPA) for 3
seconds~
If pushed and held for 2 seconds, will change the
baro setting display from INHG to HPAor vice versa. Once
the baro setting display is visible the rotary knobs 'may .be
used to adjust the baro selling.
I
Figure 3, Bendix/King KAP 1402 Axis Autopilot with Altitude
Preselect; Operating Controls and Indicators.(Sheet 1 of 2)
S15-12
Revision.5