www.ti.com
2.4.2 Video Port Status Register (VPSTAT)
Video Port Control Registers
The video port status register (VPSTAT) indicates the current condition of the video port.
The video port status register (VPSTAT) is shown in
and described in
.
Figure 2-2. Video Port Status Register (VPSTAT)
31
16
Reserved
R-0
15
4
3
2
1
0
Reserved
DCDIS
HIDATA
Reserved
R-0
R-x
R-x
R-0
LEGEND: R = Read only; -n = value after reset
Table 2-4. Video Port Status Register (VPSTAT) Field Descriptions
Bit
field
(1)
symval
(1)
Value
Description
31-4
Reserved
-
0
Reserved. The reserved bit location is always read as 0. A value written to this field
has no effect.
3
DCDIS
OF(value)
Dual-channel disable bit. The default value is determined by the chip-level
configuration.
DEFAULT
0
Dual-channel operation is enabled.
ENABLE
DISABLE
1
Port muxing selections prevent dual-channel operation.
2
HIDATA
OF(value)
High data bus half. HIDATA does not affect video port operation but is provided to
inform you which VDATA pins may be controlled by the video port GPIO registers.
HIDATA is never set unless DCDIS is also set. The default value is determined by the
chip-level configuration.
DEFAULT
0
NONE
USE
1
Indicates that another peripheral is using VDATA[9-2] and the video port channel A
(VDIN[9-2] or VDOUT[9-2]) is muxed onto VDATA[19-12].
1-0
Reserved
-
0
Reserved. The reserved bit location is always read as 0. A value written to this field
has no effect.
(1)
For CSL implementation, use the notation VP_VPSTAT_field_symval
SPRUEM1 – May 2007
Video Port
37