www.ti.com
4.12.14 Video Display Field 2 Timing Register (VDFLDT2)
Video Display Registers
Figure 4-43. Video Display Field 1 Timing Register (VDFLDT1)
31
28
27
16
Reserved
FLD1YSTART
R-0
R/W-0
15
12
11
0
Reserved
FLD1XSTART
R-0
R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 4-18. Video Display Field 1 Timing Register (VDFLDT1) Field Descriptions
Bit
field
(1)
symval
(1)
Value
Description
31-28
Reserved
-
0
Reserved. The reserved bit location is always read as 0. A value written to this field
has no effect.
27-16
FLD1YSTART
OF(value)
0-FFFh
Specifies the first line of field 1. (The line where FLD is asserted.)
DEFAULT
0
15-12
Reserved
-
0
Reserved. The reserved bit location is always read as 0. A value written to this field
has no effect.
11-0
FLD1XSTART
OF(value)
0-FFFh
Specifies the pixel on the first line of field 1 where the FLD output is asserted.
DEFAULT
0
(1)
For CSL implementation, use the notation VP_VDFLDT1_field_symval
The video display field 2 timing register (VDFLDT2) sets the timing of the field identification signal.
In raw data mode, the FLD signal is asserted whenever the frame line counter (FLCOUNT) is equal to
FLD2YSTART and the frame pixel counter (FPCOUNT) is equal to FLD2XSTART (this is shown in
In BT.656 and Y/C mode, the FLD signal is asserted to indicate field 2 display whenever FLCOUNT =
FLD2YSTART and FPCOUNT = FLD2XSTART. The FLD output is completely independent of the timing
control codes. The F bit in the EAV/SAV codes is controlled by the VDFBIT register.
The video display field 2 timing register (VDFLDT2) is shown in
and described in
Figure 4-44. Video Display Field 2 Timing Register (VDFLDT2)
31
28
27
16
Reserved
FLD2YSTART
R-0
R/W-0
15
12
11
0
Reserved
FLD2XSTART
R-0
R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 4-19. Video Display Field 2 Timing Register (VDFLDT2) Field Descriptions
Bit
field
(1)
symval
(1)
Value
Description
31-28
Reserved
-
0
Reserved. The reserved bit location is always read as 0. A value written to this field
has no effect.
27-16
FLD2YSTART
OF(value)
0-FFFh
Specifies the first line of field 2. (The line where FLD is asserted.)
DEFAULT
0
15-12
Reserved
-
0
Reserved. The reserved bit location is always read as 0. A value written to this field
has no effect.
(1)
For CSL implementation, use the notation VP_VDFLDT2_field_symval
136
Video Display Port
SPRUEM1 – May 2007