![background image](http://html1.mh-extra.com/html/texas-instruments/msp50c6xx/msp50c6xx_user-manual_1097068021.webp)
Functional Description for the MSP50C614
1-7
Introduction to the MSP50C6xx
Figure 1–2. Oscillator and PLL Connection
MSP50P614
MSP50C6xx
OSCIN
OSCOUT
PLL
C(PLL) = 3300 pF†
22 pF†
22 pF†
10 M
Ω
†
10 M
Ω
†
32.768 kHz†
† Keep these components as close as possible to the OSCIN, OSCOUT, and PLL pins.
a) Crystal Reference Oscillator Connections
b) Resistor Trim Oscillator Connections
MSP50C6xx
MSP50P614
OSCIN
OSCOUT
PLL
R(RTO) = 470 k
Ω
1%†
C(PLL) = 3300 pF†
† Keep these components as close as possible to the OSCIN, OSCOUT, and PLL pins.
The peripheral consists of five 8-bit wide general-purpose I/O ports, one 8-bit
wide dedicated input port, and one 16-bit wide dedicated output port. The
general-purpose I/O ports are bit-wise programmable as either
high-impedance inputs or as totem-pole outputs. They are controlled via
addressable I/O registers. The input-only port has a programmable pullup
option (100-k
Ω
minimum resistance) and a dedicated service interrupt. These
features make the input port especially useful as a key-scan interface.
A simple one-bit comparator is also included in the periphery. The comparator
is enabled by a control register, and its input pins are shared with two pins in
one of the general-purpose I/O ports.
Summary of Contents for MSP50C6xx
