![background image](http://html1.mh-extra.com/html/texas-instruments/msp50c6xx/msp50c6xx_user-manual_1097068149.webp)
Special Filter Instructions
4-63
Assembly Language Instructions
mov
A0,*nextSample
;Replace last sample with newest
sample
mov
*R0,A0
; and update the start of the
mov
*startOfBuff,R0
; circular buffer to here (R0)
First, the overflow mode must be reset. Next, R5 must be loaded with the wrap
around value of the circular buffer. Wrap around happens automatically. This
tells the processor how many words to step back when the end of the circular
buffer is reached. This value must be negative and equal to N words even
though the buffer is N+1 words long. For example, suppose a four word circular
buffer starts at RAM location 0x0100 and ends at 0x0106 (N = 3). In order to
wrap around from location 0x0106 back to location 0x0100, the value 0x006
must be subtracted from 0x0106, giving 0x0100.
0x0100
TAGGED LOCATION
0x0106
0x0104
0x0102
Go back N words to
wrap around
R0 must point to the current starting point of the circular buffer. R1 must point
to the filter coefficients. The MR register must contain the first filter coefficient,
h[0]. R0 and R1 must be used this way. The filtering operation will not work if
the Rx registers are reversed. The following are the only allowable register
combinations,
R0 points to circular buffer and R1 points to filter coefficients
R2 points to circular buffer and R3 points to filter coefficients
Summary of Contents for MSP50C6xx
