![background image](http://html.mh-extra.com/html/texas-instruments/emif16/emif16_user-manual_1097088052.webp)
4.16 NAND Flash CS3 (CE1) 1-Bit ECC Register (NFECCCS3R)
4-18
KeyStone Architecture External Memory Interface (EMIF16) User Guide
SPRUGZ3A—May 2011
Chapter 4—Registers
www.ti.com
4.16 NAND Flash CS3 (CE1) 1-Bit ECC Register (NFECCCS3R)
The NAND Flash CS3 1-Bit ECC Register is exactly the same as NAND Flash CS2 1-Bit
ECC Register, only difference being the former is used for device on CE1.
4.17 NAND Flash CS4 (CE2) 1-Bit ECC Register (NFECCCS4R)
The NAND Flash CS4 1-Bit ECC Register is exactly the same as NAND Flash CS2 1-Bit
ECC Register, only difference being the former is used for device on CE2.
4.18 NAND Flash CS5 (CE3) 1-Bit ECC Register (NFECCCS5R)
The NAND Flash CS5 1-Bit ECC Register is exactly the same as NAND Flash CS2 1-Bit
ECC Register, only difference being the former is used for device on CE3.
4.19 NAND Flash 4-Bit ECC Load Register (NANDF4BECCLR)
The NAND Flash 4-Bit ECC Load Register is shown in
.
Figure 4-12
NAND Flash 4-Bit ECC Load Register (NANDF4BECCLR)
31
10
9
0
Reserved
4BIT_ECC_LOAD
R - 0x0
RW - 0x0
Table 4-13
NAND Flash 4-Bit ECC Load Register (NANDF4BECCLR) Details
Bit
Field
Reset Value
Description
31-10
Reserved
0x0
Reserved. The reserved bit location is always read as 0. A value written to this field
has no effect
9-0
4BIT_ECC_LOAD
0x0
4-Bit ECC Load.
This register is used to load 4-bit ECC values when performing syndrome
calculation during NAND Flash reads.
End of Table 4-13