Teufel KA.L30, User Manual

Page: 116 / 136

116
EN
FR
ES
IT
DD
DE
KnieAgil® Joints User Manual R1
Individual Adjustment
Tighten the screw ­ Higher walking speed:
increase damping
Loosen the screw ­ Lower walking speed:
decrease damping
2
#30
Factory Setting of
Extension Screw E#30
Carefully tighten the Allen screw until you
feel resistance.Then loosen the screw
again by one turn.
Individual Adjustment
Turn the screw clockwise towards <+>
to increase extension damping (stop
damping). Please note: If there is a clearly
audible sound upon extension during the
gait cycle, extentsion damping should
be increased <+>.
Dynamic Fitting
a. First, remove the knee cover, so you
can make all necessary adjustments.
b.
The setting screws for adjusting
flexion and extension are located
on either side of the joint. The sides of
the joint are marked with the letter „E“
(extension) and the letter „F“ flexion.
Each setting screw #30 (marked in
green in the image below) is located
between two fixing screws (marked in
red in the image below). The fixing
screws may not be opened!
c.
We recommend to start by
adjusting the flexion.
Factory Setting of
Flexion Screw F#30
Carefully tighten the Allen screw until you
feel resistance.Then loosen the screw
again by half a turn.
#30