Teufel KA.L30, User Manual

Page: 118 / 136

118
EN
FR
ES
IT
DD
DE
KnieAgil® Joints User Manual R1
d.
Insert new spring.
Adjusting the Damping Unit
(Stance Flexion)
• The Allen screw that is located
distally on the inside of the pylon
receiver influences the stance flexion
damping unit. The initial tension of
this damping unit can be adjusted.
• Tighten the Allen screw by turning it
clockwise ­ initial tension is increased.
• Loosen the Allen screw by turning it
anti­clockwise ­ initial tension
is decreased .
a. Insert adjustment key into hole.
b. Lift the cap nut towards proximal.
c. Pull spring out in a downwards motion.
Insert alternative spring, with black disc
facing up.