Teufel KA.L30, User Manual

Page: 86 / 136

86
Adjusting the Extension Speed
The extension assist spring is located
in the distal pylon adapter. It can be
adjusted by way of a slotted screw.
The extension assist is set to a medium
extension speed upon delivery.
Tighten the screw ­ Higher extension
speed
Loosen the screw ­ Lower extension
speed
TIP: Replacing the Extension
Assist Spring
We recommend using the optional, softer
extension assist spring in case the anterior
stop feels too intense.
Adjusting Axis Friction for
Flexion Damping
EN
FR
ES
IT
DD
DE
KnieAgil® Joints User Manual WLD31s
The lock of the WLD 31s offers
two functions:
1. When the joint is unlocked with the
cable, the patient can flex his knee.
Once the knee is extended, it will auto­
matically and audibly lock again.
2.
There is one Allen screw to the left and
one to the right of the lock. With these
screws, the lock can be permanently
deactivated. Always tighten these
screws evenly.
Please note:
The lock should only be
deactivated once the patient is able to
safely walk and stand without a joint lock.
Static Fitting
Upon delivery, every joint is set to a
basic setting.
Ask the patient to stand up. Remain
close, so you can support the patient
if necessary.
Individually adjust all components until
the patient is able to stand securely.
Optional adjustments are described in
the section “Dynamic Fitting”.
Dynamic Fitting
The following joint settings can be adjus­
ted if desired. We recommend following the
suggested order of adjustments.
#2
#1
#3