background image

 
 
 

 

 

 

OPERATION MENU’S 

 
 

6.5.5 

Process Recipe Status 

 

Figure 6-41 Process Recipe Status 

 
The Process Recipe Status allows the user to monitor the contents of any process recipe 
present in the DPC memory 

without the possibility to modify

.  

Accidental alteration of the process recipe contents is not possible. Therefore this menu is 
the safest way to review a process recipe. 
The current process recipe is preselected but any available recipe can be selected by entering 
its recipe number. 
Press <NORMAL> to select the “normal process recipe” or <ABORT> to select the “abort 
recipe”. Select the appropriate number, followed by <RETURN>. The contents of the 
selected recipe will be presented in the following screen (contents may differ) 
 

 

Figure 6-42 Detail Status of the Tube 

 
The topsection of this screen displays the tube Id and name, the recipe name and number, 
the number of bytes the Recipe occupies in memory and, if the recipe is running, the current 
step number in the process (A). The next section (B) display the first page of recipe contents 
or, if the recipe is running, the lines starting at the contents of the current step. The 

T

OUCHSCREEN 

R

EFERENCE MANUAL

 

6-41

Summary of Contents for M440-01































































Reviews: