OPERATION MENU’S
6.4.2
Start/Stop Process Recipe
Figure 6-28 Start/Stop Process Recipe
The <Start> command is used to start a process recipe, that is to go from Step “0” to step
“1”. Additionally, <Start> will be required to continue a process recipe if it has been paused
by the Stop command and if the system is “Waiting for operator”.
The <Stop> command is used to stop the timer in a particular process step. The current
process status is presented in the center screen. It includes process recipe id and name,
optional variable time, the current process step and its running status.
An optional <Jump> command can only be issued if the process recipe is stopped. It is not
possible to jump to another process step if the process recipe is still running.
NOTE
Jumping to another process step may cause dangerous situations. Verify
the settings in the jumped to step before using this command.
T
OUCHSCREEN
R
EFERENCE MANUAL
6-30
