OPERATION MENU’S
6.2.1.1
Tube Id and Name
Figure 6-9 Tube Id and Tube Name
This screen enables the user to change the Id and the name of the tube.
Enter the new Id, with a maximum of two characters, followed by <RETURN>. The first
character must be a letter of the alphabet in the range A to Z. The second character must be
a number in the range 0 to 9.
6.2.1.2 Tube
Configuration
Figure 6-10 Tube Configuration DPC
This screen enables the selection of the number of recipes, boat parameters and the pressure
control parameters. The new value will be stored by pressing <RETURN>. The current
value can be kept by confirming with the <RETURN> key. The information in brackets
show the range of the possible values for each parameter.
Process Recipes
The total number of process recipes can be change between 8 (8x
1500 bytes) or 16 (16x750 bytes).
T
OUCHSCREEN
R
EFERENCE MANUAL
6-10
