OPERATION MENU’S
6.2.1.4 Analog
Inputs
Figure 6-12 Analog Inputs
This submenu defines the settings for the analog inputs. To define an analog input first select
its number.
Give for each input the name (mnemonics, maximum eight characters), the minimum and
maximum range value and its unit. Confirm input by pressing <RETURN>. The possible
input selection is shown on the line above the keyboard.
When all the alterations have been made, press <ESCAPE> to return to the DPC
Certification Menu.
6.2.1.5 Digital
Outputs
Figure 6-13 Digital Outputs
This submenu defines the digital outputs. The output can be edited by entering its number,
followed by <RETURN>. When the name is set, confirm with the <RETURN> key. When
all the changes are performed, press <ESCAPE> to return to the DPC Certification Menu.
If there are more than sixteen digital outputs, press <N> to go to the next sixteen
combinations.
T
OUCHSCREEN
R
EFERENCE MANUAL
6-12
