FSP200
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
18
Section 3.
Menu Operation
Press
to enter the splicer menu. There are six main menus:
1.
Splice Mode Menu (S–Mode)
2.
Heater Mode Menu (H–Mode)
3. Maintenance
4.
Splice Set
5.
Data Save
6. Set
Explanation of Splice Modes
Mode No.
Splice Mode
Description
1
AUTO
For splicing in most cases; the splicer will automatically adjust splice parameters according to
fiber type.
Automatic arc calibration works in this splice mode.
2
AUTO SM
For splicing standard single-mode fiber (ITU-T G652).
The MFD is 9 to 10 µm at wavelength of 1310 nm.
Automatic arc calibration works in this splice mode.
3
AUTO DS
For splicing dispersion-shifted fiber (ITU-T G653).
The MFD is 7 to 9 µm at wavelength of 1550 nm.
Automatic arc calibration works in this splice mode.
4
AUTO NZ
For splicing non-zero dispersion-shifted fiber (ITU-T G655).
The MFD is 9 to 10 µm at wavelength of 1550 nm.
Automatic arc calibration works in this splice mode.
5
AUTO MM1
For splicing multi-mode fiber (ITU-T G651). Core diameter: 50.0 to 62.5 µm.
Automatic arc calibration works in this splice mode.