FSP200
23
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
(2) Edit Heater Mode
Tube-heating conditions stored in heater mode can be edited or changed.
Editable parameters include Heat Time and Heat Temp (heating temperature). Heat Time will automatically adjust according to
atmospheric conditions, e.g., ambient temperature. The actual Heat Time may vary from set Heat Time.
Sets Heating Temperature: Fiber coating may melt if Heat Temp is over 190 °C (374 °F).
Sets Finish Temp (Finish Temperature): When heater approaches this temperature, the buzzer beeps, announcing the sleeve is
cooled down and is ready to be removed from the heater.
In “Select Heater Mode”, use the right arrow key to enter the “Edit Heater Mode” menu.
Edit Mode for Heater Settings
•
Sleeve Type: Enter the protection sleeve name.
• Mode Title1: Enter the heater mode setting name.
• Mode Title2: Enter the alternate heater mode setting name.
• Heat Time: Enter the heater duration.
• Heater Control: Enter the splice protector size as Long, Mid or Micro.
• Center Heat Temp: Enter the center of the oven temperature.
• L-R Heat Temp: Enter the left- and right-hand sides oven temperature.
• Cool Time: Disable it when not needed. Also, to disable the beep. (The “beep” is activated when the “cool time” has
been set as “x” seconds; there is no “beep” when the cool time has been set to zero seconds.)
• Heater Mode: Enter the mode as center and sides activated or center only activated.
• Power Mode: Enabling preheats the oven for accelerated shrinking performance.