FSP200
11
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
Section 2.
Operation
Setup
Installing Battery in Splicer
The FSP200 can be powered by an external power adapter and battery.
Inserting the Battery
Remove the protective cover from the battery contacts. Insert the battery into the battery compartment until it clicks into place.
Removing the Battery
Turn off the splicer. Push the release button, located on the side of the splicer body, and remove the battery.
Two Methods of Checking Remaining Battery Capacity
•
If the battery is already installed in the splicer, turn the splicer ON. The battery is automatically identified, and the
remaining battery capacity is displayed on the “Ready” screen.
• Press the battery check button on the battery pack. The remaining battery capacity is indicated on the LED indicator.
Remaining battery capacity indicator
Remaining battery
5 LED
80~100%
4 LED
60~80%
3 LED
40~60%
2 LED
20~40%
1 LED
Less than 10%
