FSP200
39
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
Appendix C.
Tempo Splice-on Connectors
Note: This splice-on connector is compatible with 900 µm optical fiber.
Tempo Communications splice-on connector contains the following items:
A.
(1) Handle, each kit contains a limited number
B.
(1) Outer housing (SC style only)
C.
(1) Splice-on connector (SOC) pigtail with cleave protector and fiber alignment sleeve
D.
(1) 27 mm mini splice sleeve
E.
(1) Universal strain relief boot
F.
(1) Fiber positioning tool (not pictured)
Note: If fiber alignment sleeve has become separated from the SOC body, do not attempt to re-install; discard it.
A
B
C
D
E
Cable Preparation
Slide the 900 μm strain relief boot and then the 27 mm mini splice protective sleeve over the 900 μm field fiber. Use the FCL200
to cleave the field fiber. Insert the fiber adapter with the cleaved fiber into the left-hand side of the FSP200 fusion splicer. Make
sure to butt the 900 μm buffer up to the edge of the fiber adapter. This will ensure that the mini splice sleeve will adhere to both
sides of the 900 μm buffer.
Installation
1. Remove the factory dust cap from the connector.
Note: The extended dust cap may be placed on at this time, if so desired, to aid in the transfer of the connector. DO NOT
LEAVE THE EXTENDED DUST CAP ON THE CONNECTOR, INSIDE THE FUSION SPLICE MACHINE.
2. While holding the connector firmly, pull down on the cleave protector to remove it from the connector (Figure 1).
* Tensao AC
Tensao DC
Isolamento
Capacitancia
Resistencia
Teste de Estress
Corrente de Loop
DIT e Telephone
Trocar Capacitância
Tempo
COMPA v4.08
<Menu Teste>
DIT e Telephone
Corrente de Loop
Teste de Estress
Resistencia
Capacitancia
Isolamento
Tensao DC
Tensao AC
1
2
3
4
Figure 1
3. Insert the connector into the universal splice-on connector holder so that the back end of the connector is flush with the
end of the holder (Figures 2-5). Once aligned properly, the connector should fit freely into the holder with no force
required.
Figure 2 (SC)
Figure 3 (FC)
Figure 4 (LC)
Figure 5 (ST)
