FSP200
5
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
Important Safety Information
(cont’d)
Electric shock hazard:
Contact with live circuits could result in severe injury or death.
Wear eye protection when using this tool.
Fiber fragments can be extremely dangerous if they come into contacts with
eyes or skin or are ingested.
Disconnect AC power cord from AC adapter inlet or wall socket (outlet) immediately if user
observes the following or if the splicer receives the following faults:
•
Fumes, bad odor, noise, or overheat occurs.
• Liquid or foreign matter falls into cabinet.
• Splicer is damaged or dropped.
If these faults occur, return unit to Tempo Communications service center for repair. Leaving
splicer in a damaged state could cause equipment failure, electric shock or fire, and could result
in severe injury or death.
Electric shock hazard:
•
Use only AC adapter or battery charger designed for this splicer. Using an improper AC power
source could cause fuming, electric shock, or equipment damage.
•
Do not disassemble or modify splicer, AC adapter, or battery. Do not remove or bypass any
electrical or mechanical device (e.g., fuse or safety switch) incorporated into design and
manufacturing of this equipment.
•
Never operate tool in an environment where flammable liquids or vapors exist. Risk of fire or
explosion could result from the tool’s electrical arc in such an environment.
•
Do not use compressed gas or canned air to clean tool. They may contain flammable
materials that could ignite during electrical discharge.
•
Do not touch electrodes when splicer is on and power is supplied to unit. The electrodes
generate high voltage and high temperatures that could cause a severe shock or burn.
•
Turn tool off and disconnect AC power cord before replacing electrodes.
Failure to observe these warnings could result in severe injury or death.
