FSP200
Tempo Communications Inc.
1390 Aspen Way • Vista, CA 92081 USA • 800-642-2155
16
4.
Open the tube heater lids and remove the protected fiber from the tube heater. Apply some tension to the fiber while
removing it from the tube heater.
5.
Visually inspect the finished sleeve to verify that no bubbles or debris/dust is present in the sleeve.
Cooling Tray
Place the splice into the cooling tray on the back of the FSP200 splicer.
Splice-on Connectors
The FSP200 uses the Tempo Communications version of splice-on connectors. The FSP200 currently supports SC, LC, FC, and
ST versions (both PC and APC finish, where applicable).
Follow the instructions supplied with the splice-on connectors packaging.